Pages: [1]
Author Topic: One Nixie Tube Hookup schematic/example  (Read 3982 times)
nonentity
Co-Owner, Robotpirate
Administrator
Full Member
*****
Posts: 182



View Profile
« on: July 11, 2009, 08:16:30 AM »

One Bulb Hookup example: In this example, the anode output channel is sending 180 volts through the 10K Resistor to the anode pin of the Nixie Tube. The driver chip on the ArduiNIX opens the 0 cathode terminal, allowing the 0 cathode lead to ground out, lighting the 0 element in the tube.

Logged

nonentity
Robotpirate Founder
www.robotpirate.com

Pages: [1]
Print
Jump to: