Show Posts
Pages: [1]
1  Projects / ArduiNIX / Re: Six Bulb Code Example. on: September 04, 2009, 06:02:07 pm
I am using this example to do multiplexing. But I found that Anode 3 (i.e. ledPin_a_2 engaged to pin 11 of Arduino) is not working, while all other 3 anodes work just fine. Anode 3 is always HIGH (180V) and is not responsive to the change of delay time.

Does anyone have the same problem and is there a solution?

THX!
2  Projects / ArduiNIX / Re: Coming Soon for the ArduiNIX! - IN-17 PLUG IN tube boards from RobotPirate. on: August 20, 2009, 11:25:32 pm
Awesome, can't wait to get one, tho i only have IN-12B tubes at this moment.
3  Projects / ArduiNIX / Re: Attention! Need help tracking down a low power issue. on: August 20, 2009, 11:17:49 pm
Thanks Mike and Bradley, I used a 12V 300mA wall adapter today and the Nixie Tube is glowing! But it isn't that bright.

Mike's adapter is 1A, right? Is it save for Arduino and ArduiNIX to use that high current? Is there a suggested highest current for Duemilanove?

miu
4  Projects / ArduiNIX / Re: Attention! Need help tracking down a low power issue. on: August 18, 2009, 12:54:40 pm
Does it matter if I am using the new Duemilanove instead of Diecimila? Anyways, I will test the ArduiNix on Diecimila tonight.

I am using this Wall Adapter Power Supply - 9VDC 650mA from SparkFun.com

http://www.sparkfun.com/commerce/product_info.php?products_id=298

Many thanks!

5  Projects / ArduiNIX / Re: Voltage Range on: August 14, 2009, 11:02:42 pm
Hi,

I'm sending these two pictures to your emails cuz i can't upload big files here. We've checked all the components and they are the same as described in the manual.

Thanks for helping!

miu
6  Projects / ArduiNIX / Re: Voltage Range on: August 10, 2009, 06:13:08 pm
9VDC 650mA Wall Adapter Power Supply

What should be the voltage range that ArduiNIX outputs normally?

If I should replace C3 to a smaller capacitor, what capacitance should I use?

thx!
7  Projects / ArduiNIX / Voltage Range on: August 10, 2009, 01:01:58 pm
Both C3 and C4 are identical 500volt 47pF capacitors in my kit and it outputs 96-113V. Is it normal?

Should I replace C3 with a smaller capacitor to get higher voltage output?
Pages: [1]