|
Title: Was: Very low Voltage. Now: good news: After re-soldering works great! Post by: bju on October 21, 2009, 07:10:00 PM Hello,
if I do the voltage test on my first new soldered ArduiNIX, I get only 14V using a 9V power supply. I think I've soldered all things at the right places. Are there some more tests I can do to locate the error? Thanks for help, Bernd Title: Re: Very low Voltage Post by: nonentity on October 21, 2009, 07:51:24 PM Hello, if I do the voltage test on my first new soldered ArduiNIX, I get only 14V using a 9V power supply. I think I've soldered all things at the right places. Are there some more tests I can do to locate the error? Thanks for help, Bernd Sorry to hear that, Bernd! Here's what we usually do in a case like this. If you can get me some more info as to what you've got going on, some good pictures of the front and back, so I can see how you have it soldered, and we'll go from there. Do not worry though, if all else fails, if you send me your kit, I'll send you a completed, fully functional and tested unit. Lets try figuring out what's going on with your kit first, though. Brad Title: Re: Very low Voltage Post by: bju on October 22, 2009, 03:00:55 PM Hello Brad,
good news: After re-soldering some points the anode voltage is reaching 183V. I've connected some digits of one IN-18 tube and it looks really great :-) Greetings, Bernd Title: Re: Was: Very low Voltage. Now: good news: After re-soldering works great! Post by: nonentity on October 22, 2009, 04:18:41 PM Wonderful news, Bernd! So glad you got it working.. please send pics when you can, I'll host them and feature your project on the site.
Brad |